Difference between revisions of "HowToCleanEdgeConnectors"

Revision as of 12:42, 16 January 2009

Observe anti-static precautions
Don't set fire to yourself
Don't blame me if you break stuff
Wear suitable gloves, avoid inhaling solvents, use appropriate ventilation etc.
Clean edge-connectors with a cotton-bud (cue-tip) dipped in isopropyl alcohol ("IPA"/Isopropanol)
Clean DIMM/PCI slots using a stiff piece of card (the same thickness at the DIMM/PCI PCB), wetted with isopropyl

Isopropanol is available from many chemists/pharmacists.

You can also buy commercial connector, and PCB cleaning solutions and devices.

Revision as of 12:52, 9 March 2006 (view source) TimSmall (talk \| contribs) ← Older edit	Revision as of 12:42, 16 January 2009 (view source) WikiSysop (talk \| contribs) m (3 revisions) Newer edit →
(No difference)